From: Lawrence M Gibbs <lgibbs**At_Symbol_Here**STANFORD.EDU>
Subject: Re: [DCHAS-L] Molecular Beam Epitaxy Equipment Decontamination
Date: Fri, 21 Jul 2017 15:33:28 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 28261725-9F1D-4A1F-A907-84EDBBE666F2**At_Symbol_Here**stanford.edu
In-Reply-To <1499911194072.92662**At_Symbol_Here**auburn.edu>


Below is a paper used by some of our PIs for developing their procedures.

Oye, M., J. Ahn, et al. (2005). "Inert gas maintenance for molecular-beam epitaxy systems."

Larry

> On Jul 13, 2017, at 4:20 AM, Catherine Situma wrote:
>
> All,
> Does anyone have experience with decontamination of molecular beam epitaxy equipment? This equipment was utilized for synthesis of GaAS, I have looked at the SOP by University of Michigan Flint "MBE Chamber Maintenance" but wanted to check with this group for more input.
> Thanks,
> Catherine Situma
>
> ---
> For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org
> Follow us on Twitter **At_Symbol_Here**acsdchas

---
For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.