From: Harry Elston <helston**At_Symbol_Here**MIDWESTCHEMSAFETY.COM>
Subject: Re: [DCHAS-L] plumbing H2 from remote location
Date: Thu, 1 Oct 2015 10:43:38 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 004c01d0fc5f$f57cbdb0$e0763910$**At_Symbol_Here**midwestchemsafety.com
In-Reply-To <2E68EA190EA75E4C9399D75B40B6346679A3A73B**At_Symbol_Here**EX01.eup.edinboro.edu>


Janet,

 

If done correctly, plumbed system will not add to the risk of the project.  By “done correctly” I mean that: (1)the gas piping is double-walled stainless, (2) properly designed and executed hydrogen monitoring in the storage and use areas and (3) cylinders are stored flammable gas storage cabinets.

 

The cylinders  next to the instrument should be in flammable gas storage cabinets now and you should be drawing the hydrogen from the cabinet, not a bare tank.   Likewise, you should be monitoring near the ceiling and in the corners now as well.

 

Harry

 

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of Rogers, Janet
Sent: Thursday, October 01, 2015 10:25 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] plumbing H2 from remote location

 

To All:

 

We need to use H2 gas for FID-GC.  Our campus EH&S officer wants us to plumb H2 gas from a cylinder placed at some remote location (as yet unknown to me, but I've heard both: a) from the hallway and b) from outside the building) to our instrument lab.  We do not see why we cannot use the H2 cylinder in the instrument lab, next to the instrument, as we have been doing.  Increasing the distance between the H2 cylinder and the instrument seems like it would increase the safety risk. 

 

I'd appreciate hearing your thoughts/comments/experience in handling H2 safely in your labs.

 

 

Janet Rogers, Ph.D.

Professor

Chemistry Department

Edinboro University of Pennsylvania

230 Scotland Road

Edinboro, PA  16444

 

phone: 814.732.1539

e-mail: rogers**At_Symbol_Here**edinboro.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.