From: "Buczynski, Michael" <Michael.Buczynski**At_Symbol_Here**RB.COM>
Subject: Re: [DCHAS-L] Original source of safety data?
Date: Fri, 27 Feb 2015 15:13:44 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 14AAD9DC657DF948AE6AC4668C6236536F1205EA**At_Symbol_Here**gb02qap522rbb27.ibm.rb.net
In-Reply-To <14bcb8a118c-30a8-8668**At_Symbol_Here**webprd-m73.mail.aol.com>


Monona,

 

You are correct and your post here really gets to the heart of the matter.  "Is OSHA going to Focus on a (M)SDS really?"  If there is an explosion in the workplace, then I expect they will.  My response is as a result of the emails that have been going forth for some time on this particular issue here and within other Trade Associations and I suggested a solution to those of us who are REALLY concerned.  I don't expect much enforcement unless the OSHA Regional Administrator directs the Area Offices to do so.

 

Mike

 

Michael A. Buczynski

 

 

Director Regulatory Compliance

North America

RB (Reckitt Benckiser)

399 Interpace Parkway

Parsippany, NJ USA 07054-0225

 

T: +1-973.404.2484

M: +1-973.570.9457

michael.buczynski**At_Symbol_Here**rb.com

 

Please think before you print.

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU]On Behalf Of Monona Rossol
Sent: Friday, February 27, 2015 9:57 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Original source of safety data?

 

Mike, The reality is that the "questioning" by OSHA is only going to occur after a complaint has been lodged about a manufacturer's SDS.  That's not going worry most art, theatrical, and construction product manufacturers. They rarely are even asked for SDSs.

 

In addition, manufacturers have a relationship with their suppliers.  There is every reason to believe that suppliers will be only too happy to supply the evidence of a good faith effort just to keep their customer's business.  A couple of e-mails or a letter and case closed.

 

There are even language barriers between suppliers and manufacturers to exploit because most of the world's organic pigments are manufactured in India, Bangladesh and China. 

 

And who would complain to OSHA about an MSDS?   Not having proper SDSs in a school or business carries no OSHA penalty either.  The employer only has an obligation to obtain what ever document the supplier gives them.  Employers don't care what the manufacturer sends.  They don't read it.  Hell, they can't even understand it.  (And they sure aren't training their employees to read them either.)

 

And none of our labels are going to be GHS because they are already exempted in .1200(b)(5) & (6) since they come under EPA (pesticides, disinfectants, etc.), FDA (cosmetics), CPSC (all other consumer products) and ATF(for pytrotechnic chemicals).

 

So you think that school science departments and chemical companies may actually do this?  That's very good.  But if the university EH&S people have the courage to venture into the other chemical-handling departments (art, theater, architecture, etc.), they are not going to see much compliance.

 

Monona

 

PS.  I note you are in New Jersey, the only state that ever had a truly functional Right to Know law for public employees under PEOSHA.  It was wonderful--that is, until Gov. Whitman cut it's requirements.  Maybe you and I can remember a law that really did work and was enforced.

 

 

Monona Rossol, M.S., M.F.A., Industrial Hygienist

President:  Arts, Crafts & Theater Safety, Inc.

Safety Officer: Local USA829, IATSE

181 Thompson St., #23

New York, NY 10012     212-777-0062

actsnyc**At_Symbol_Here**cs.com   www.artscraftstheatersafety.org


 

 

 

-----Original Message-----
From: Buczynski, Michael <Michael.Buczynski**At_Symbol_Here**RB.COM>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sent: Fri, Feb 27, 2015 8:13 am
Subject: Re: [DCHAS-L] Original source of safety data?

The bottom line here is that OSHA HAS NOT GRANTED any extensions nor modified the HCS per se.  It stands as promulgated.  What this memorandum/guidance says is that upon being questioned can you provide documentation of requests that you have made of your suppliers to obtain the new SDS. The enforcement is at the digression of the Compliance Officer and is subject to his/her interpretation. As a former OSHA IH/COSHO, I can tell you that the interpretation by various COSHOs in any one of the 10 Regions will be enforced as the Area Director of that Region dictates. You all have read about the ways different people interpret the standards.

 

My advice is (and we are employing it at RB) to go ahead and do your own classification for your own products following the rules outlined in the HCS to produce a SDS and comply with the June 1, 2015 date.  When your supplier then provides you with their SDS, you can then modify your SDS. Actually according to the HCS you have 90 days to make any significant change and distribute the new version to your customers.

 

Stop and review the hazard information from the old Supplier MSDS, and use that information when you perform your classification regimen.  I doubt that when you do receive your supplier's new GHS compliant SDS, you will find a great difference in most cases. By the way, the Society for Chemical Hazard Communication (SCHC) has a great GHS training course:

 

 

 

 

Mike

 

 

Michael A. Buczynski

 

Director Regulatory Compliance

North America

RB (Reckitt Benckiser)

399 Interpace Parkway

Parsippany, NJ USA 07054-0225

 

T: +1-973.404.2484

M: +1-973.570.9457

 

Please think before you print.

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU]On Behalf Of Kim Gates
Sent: Friday, February 27, 2015 7:35 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Original source of safety data?

 

Here's the OSHA letter for the stay:

 

 

The purpose of this memorandum is to provide enforcement guidance on the June 1, 2015 effective date - the date by which chemical manufacturers, importers, distributors and employers must be in compliance with all modified provisions of the HCS, other than the two exceptions for distributors and employers at 29 CFR 1910.1200(j)(2)(i) and (ii). This enforcement guidance applies only to HCS 2012 compliance inspections of chemical manufacturers, importers, and distributors in their classification of hazardous chemicals and development of safety data sheets (SDSs) and labels for chemical mixtures.

Overview

This memorandum describes the Agency's enforcement position on the HCS June 1, 2015 effective date for manufacturers and importers, including product formulators, that have exercised reasonable diligence and good faith to classify their chemical mixtures according to HCS 2012 and consequently develop HCS 2012-compliant SDSs and labels. However, due to circumstances beyond their control, they have not received classifications and SDS information from upstream suppliers of raw materials. In addition, this enforcement guidance addresses when manufacturers and importers must develop HCS 2012-compliant SDSs and labels after receiving upstream supplier SDSs, as well as how this guidance affects distributors..........................

In order to determine if a manufacturer or importer has established "reasonable diligence" and "good faith efforts," the CSHO must review its overall efforts, attention, and action(s) taken to comply with HCS 2012. Upon request from a CSHO, a manufacturer or importer must provide documentation of its substantive efforts to:

 Obtain classification information and SDSs from upstream suppliers;

 Find hazard information from alternative sources (e.g., chemical registries); and,

 Classify the data themselves.

Establishing reasonable diligence and good faith effort requires that the manufacturer or importer demonstrate attempt(s) to obtain the necessary SDSs through both oral and written communication directly with the upstream supplier. For each mixture shipped by a manufacturer or importer after June 1, 2015 that does not comply with HCS 2012, the CSHO shall consider whether the manufacturer or importer:

(a) Developed and documented the process used to gather the necessary classification information from its upstream suppliers and the status of such efforts;

(b) Developed and documented efforts to find hazard information from alternative sources (e.g., chemical registries);

(c) Provided a written account of continued dialogue with its upstream suppliers, including dated copies of all relevant written communication with its upstream suppliers;

(d) Provided a written account of continued dialogue with its distributors, including dated copies of all relevant written communication with its distributors informing them why it has been unable to comply with HCS 2012; and,

(e) Developed the course of action it will follow to make the necessary changes to SDSs and labels.

Although the CSHO must consider all of the above factors, any combination of these efforts may, depending on the circumstance, be consistent with reasonable diligence and good faith efforts. The CSHO shall always consider whether the manufacturer or importer attempted to obtain the hazard information in a timely manner (i.e., in a manner that would have enabled it to comply with the June 1, 2015 effective date) in determining whether a manufacturer or importer exercised reasonable diligence and made good faith efforts to comply. Reasonable diligence and good faith also requires that the manufacturer or importer provide a clear timeline for when it expects to comply with HCS 2012........



Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
Kim.Gates**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

 

On Thu, Feb 26, 2015 at 7:26 PM, Monona Rossol <actsnyc**At_Symbol_Here**cs.com> wrote:

It's a mess, Ralph.  I'm going to answer in a round-about way. 

 

In December a petition on behalf of the trade associations for the major chemical industries asked for and received from OSHA an exemption from the June 1, 2015 deadline for SDSs.  This includes the National Association of Chemical Distributors, the National Association of Manufacturers and the Society of Chemical Manufacturers and Affiliates.

 

Their rationale was amazing.  They said they couldn't comply because their primary sources were not providing the data needed on the SDS.   And that this "Often this involves a supply chain that is three to five layers deep."

 

And all along I thought they were withholding information.  Hell, they are claiming they don't KNOW. 

 

The other flaw in their logic is that they are assuming that the primary manufacturers have and test data or information to pass down to them.  Usually the physical and toxicological data on a chemical has to be obtained from various sources and studies done over the years.  Simply knowing the identity of the chemical should be enough to do a literature search.  But clearly, they are claiming they can only get the data from their suppliers.  And just as clearly, when they get that data they will copy it on to their SDSs. 

 

So that's my answer.  But as an aside:  the petitioners also included the adhesives and sealant makers, cleaning and disinfecting product manufacturers, composite makers, agricultural product makers, and even the Greenies got into the act through the Responsible Industry for a Sound Environment.

 

 I also have a question for all of these industries.  It is this:  Do you really think the other 162 countries that have adopted the SDS and are requiring it by June 1, 2015 are going to also give them a pass?   I hope they don't.  So those manufacturers who export would be wise to find a way to cobble together an SDS.

 

Sadly, you and I, who live and purchase chemicals in THIS country, we won't be getting a lot of good SDSs.  The reason is that OSHA extended this relief from the deadline to ANY manufacturer who can show they have made a good faith effort to obtain the information from their suppliers. And from what I learned to day from an OSHA Labor Liaison and an OSHA Senior IH, they will only be enforcing the requirement to show this good faith effort if you and I file a written complaint about the bad MSDS or SDS data.  Like that's going to happen.

 

So expect that MSDSs will be around in the US for quite a while.

 

 

Monona Rossol, M.S., M.F.A., Industrial Hygienist

President:  Arts, Crafts & Theater Safety, Inc.

Safety Officer: Local USA829, IATSE

181 Thompson St., #23

New York, NY 10012    212-777-0062


 

 

 

-----Original Message-----
From: Stuart, Ralph <Ralph.Stuart**At_Symbol_Here**KEENE.EDU>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sent: Thu, Feb 26, 2015 4:20 pm
Subject: [DCHAS-L] Original source of safety data?

During our ongoing project with CINF in identifying sources of electronic
chemical safety information, a set of questions that has arisen: 
- What is the
original source of most chemical safety information (e.g. flashpoints, health
hazard data, reactivities, etc.)? - How much information, for example on a SDS,
is simply copied over from another source and how much data is actually
generated and/or verified by the author/publisher of the source? 
- What is the
original source of this data? 
- How are potential conflicts in this data
between these information sources resolved?
 
I'm sure there are people on
DCHAS-L who have experience in answering these questions for professional safety
purposes; any comments on any or all of these questions would be
appreciated.
 
- Ralph
 
Ralph Stuart, CIH, CCHO
Chemical Hygiene
Officer
Keene State College
 
ralph.stuart**At_Symbol_Here**keene.edu

 

NOTICE

 

P  Please Consider the Environment before printing this Email

 

This email was sent from within RB plc the trading name of Reckitt Benckiser Group plc group of companies (http://www.reccol.com)This email (and any attachments or hyperlinks within it) may contain information that is confidential, legally privileged or otherwise protected from disclosure. If you are not the intended recipient of this email, you are not entitled to use, disclose, distribute, copy, print, disseminate or rely on this email in any way. If you have received this email in error, please notify the sender immediately by telephone or email and destroy it, and all copies of it.

We have taken steps to ensure that this email (and any attachments) are free from computer viruses and  the like. However, it is the recipient's responsibility to ensure that it is actually virus free. Any emails that you send to us may be monitored for the purposes of ascertaining whether the communication complies with the law and our policies.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.