From: "David C. Finster" <dfinster**At_Symbol_Here**WITTENBERG.EDU>
Subject: Re: [DCHAS-L] Air quality in academic chemistry buildings
Date: April 23, 2012 12:12:38 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <OF931BF3DE.06428B02-ON852579E9.00560D80-852579E9.0056304F**At_Symbol_Here**notes.cc.sunysb.edu>


Kim, et al,

 

Here's the additional info:

 

The most pressing concern is related to chemical use in the building.
We also had some significant humidity issues, which seem to have been addressed, or at least I don't see new water spots on the ceiling tiles and condensation on the floors and windows.

Sounds like a PEL issue to me, then.

 

Dave

 

 

David C. Finster
Professor, Department of Chemistry
University Chemical Hygiene Officer
Wittenberg University
937-327-6441
http://userpages.wittenberg.edu/dfinster/index.html

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of kauletta**At_Symbol_Here**NOTES.CC.SUNYSB.EDU
Sent: Monday, April 23, 2012 11:41 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Air quality in academic chemistry buildings

 

Dave - can your colleague be more specific? Are they looking for air quality from the chemical use perspective (answer - below PELs) or temperature, humidity etc (answer - ASHRAE IAQ for general)


Kim Gates Auletta
Lab Safety Specialist
EH&S    Z=6200
Stony Brook University
kim.auletta**At_Symbol_Here**stonybrook.edu
631-632-3032
FAX: 631-632-9683
EH&S Web site:
http://www.stonybrook.edu/ehs/lab/

Remember to wash your hands!




From:        "David C. Finster" <dfinster**At_Symbol_Here**WITTENBERG.EDU>
To:        DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Date:        04/23/2012 11:37 AM
Subject:        [DCHAS-L] Air quality in academic chemistry buildings
Sent by:        DCHAS-L Discussion List <dchas-l**At_Symbol_Here**MED.CORNELL.EDU>





CHAS folks,
 
To get the best set of answers, I am forwarding below a request for information I recently received from a colleague.  
 
"Do you know if there are generally accepted air quality standards for chemistry buildings, and if there are where would I find them?
Also, do you know where I could find information about generally accepted practices with regards to testing air quality, especially in academic buildings such as ours?

I'm asking these questions in part due to a lack of knowledge, and in part based on some concerns about air quality in our chemistry building following some work on our air handling related to energy conservation."

 
Thanks for your help and advice.
 
Dave
 
 
David C. Finster
Professor, Department of Chemistry
University Chemical Hygiene Officer
Wittenberg University
937-327-6441
http://userpages.wittenberg.edu/dfinster/index.html

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.