From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**KEENE.EDU>
Subject: [DCHAS-L] Model Job Hazard Analysis for training purposes
Date: Fri, 26 Oct 2018 17:12:46 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 6BDFB688-79D0-44E8-B9F7-DFD1B850348E**At_Symbol_Here**keene.edu


I wonder if anyone on the list had developed a model Job Hazard Analysis for a laboratory scale chemical procedure that they use as a teaching tool for either the research or undergraduate laboratory audience? I'm working on a project that could benefit from reviewing several of these to identify best practices in writing JHA's. If you have one that you're developed or have seen one that impressed you, I'd appreciate a pointer in that direction.

Thanks for any help with this.

- Ralph


Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859

ralph.stuart**At_Symbol_Here**keene.edu

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.