From: Frank Stewart <hfstew**At_Symbol_Here**NETVIGATOR.COM>
Subject: Re: [DCHAS-L] contact lens use in chemistry labs
Date: Fri, 16 Sep 2016 06:53:54 +0900
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: BF1F6665-6EC6-4737-895B-FC609D08F4E6**At_Symbol_Here**netvigator.com
In-Reply-To


Risk exist in life and the labs, we manage that risk every day. A management tool that can help is "6-Sigma". Many outstanding universities and corporations use the process to manage all types of risk in chemistry. If you are not familiar with the methodology you might enjoy looking it up on goggle.

Frank 

Sent from my iPad

On 16 Sep, 2016, at 2:26 am, Debbie M. Decker <dmdecker**At_Symbol_Here**UCDAVIS.EDU> wrote:

I have so far resisted weighing in on this thread (aren't you proud of me?) but it's time.

 

I've worn contact lenses since I was 13 years old, throughout a chemistry degree, work in industry, and over 20 years as a health and safety professional in academia.  I have NEVER had an eye injury or exposure that was in any way caused by contact lens wear.  EVER.  I'm meticulous about wearing safety glasses (or goggles, when necessary).

 

Contact lenses do not absorb chemicals from the air, do not hold chemicals against the eye, do not increase the risk of eye injury, should someone get a splash to the eye.  Putting a dot on goggles or safety glasses to denote a contact lens wearer - what does that accomplish?  If someone gets a splash to the eye, they're going to activate the eyewash fountain and I'm here to tell you, if the eye is open, that contact lens will be washed out.  Trust me on this one.

 

It's counter-intuitive but prohibitions against contact lenses are not necessary, based on guidance from NIOSH, ACS, and the American Ophthalmic Association.

 

How are the hazards in lab different to a contact lens wearer than the hazards to anyone else in the lab?  Why is a waiver necessary?  And your undergraduates are wearing contact lenses in lab, whether you know it or not.

 

 

Debbie M. Decker, CCHO, ACS Fellow

Immediate Past Chair, Division of Chemical Health and Safety

University of California, Davis

(530)754-7964

(530)304-6728

dmdecker**At_Symbol_Here**ucdavis.edu

 

Birkett's hypothesis: "Any chemical reaction

that proceeds smoothly under normal conditions,

can proceed violently in the presence of an idiot."

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Jeff Tenney
Sent: Wednesday, September 14, 2016 11:43 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] contact lens use in chemistry labs

 

I would just say one thing, as this organization pushes for safety to be part of the training of future chemistry graduates, one should be careful by just following OSHA guidelines. Even though OSHA may allow it, does not mean it is the prudent thing to do from the long term employee exposure they could have in the laboratory. If I dip my had in something once, is it a real issue, but if I do it day in and day out, what becomes the chronic effects? I for one would never allow contacts to be worn in an undergraduate laboratory. I would also mandate chemical splash googles even if they need to be supplied as part of the lab fees.  The students experience with safety is very limited and in most cases they feel they are bullet proof. Even though the student may not feel they are in danger with what they are doing, it could be someone several feet away that causes the accident that can harm them. I understand students and educators may feel it is ok at an undergraduate level due to the minimal hazards involved but if you want to build a long term safety mindset, at a minimum a waiver should be given to the student(s) to understand the hazards of contacts in the lab. I would worry that the lessons learned in the undergraduate lab carries over to future lab work without understanding the hazards especially with so many chemicals not covered by OSHA.  I do understand for every rule someone will have an exception.

 

Jeff

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Biersack, Mary
Sent: Tuesday, September 13, 2016 5:32 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] contact lens use in chemistry labs

 

Hello,

Our chemistry lab currently does not allow anyone to wear contact lenses in the labs.  I'd like to propose that we allow contacts under safety glasses, goggles or face shields.  We do use methylene chloride, many different corrosive chemicals and potent compounds (mostly in chemical fume hoods but sometimes on the open bench top if dilute or in very small quantities).  The dilemma I=E2=80™m facing is that OSHA states in 1910.1052 for Methylene Chloride that contact lenses should not be worn when working with this chemical.  I take this a recommendation not a hard rule.  Some of my safety colleagues interpret "should not" to mean that contacts can be worn as long as I can prove that a hazard does not exist (which I don't think I can do but I feel comfortable with the risk level, citing NIOSH recommendations and scientific studies but not all studies are well enough designed to prove there is no hazard). 

 

My hazard evaluation would include listing the chemicals that are more of a hazard and training the chemists accordingly and letting the chemists decide if they want to take the risk or decide not to wear contacts and order the prescription safety glasses that the company will buy.  Some safety people want me to limit contact lens use only for chemical use that will pose no hazards.  However, in a very large lab with hundreds of chemicals that are constantly changing this would be more work than I feel value added and would confuse the chemists leading to non-compliance.. 

 

I would like your thoughts,

Mary

 

 

Mary Biersack

Lab Safety and Chemical Hygiene Specialist

West Pharmaceutical Services, Inc.

P: +1 610-594-3278

530 Herman O. West Drive | Exton, PA 19341 | United States

mary.biersack**At_Symbol_Here**westpharma.com

 

 

Find West on Twitter and LinkedIn.


The contents of this message are confidential and may be privileged. If you have received this message in error, please permanently delete it, along with any files that may be attached to this message, without reading, printing, copying, forwarding or otherwise distributing it. Please notify the sender of the error immediately so that we can prevent it from happening again.

--- This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety. For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org

--- This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety. For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org

--- This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety. For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.