From: "Secretary, ACS Division of Chemical Health and Safety" <secretary**At_Symbol_Here**DCHAS.ORG>
Subject: [DCHAS-L] Emerging alkane fuel vapor detection technology
Date: Tue, 29 Mar 2016 08:31:45 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: DC092733-AE5F-4A2C-AB70-BC0971AB7A89**At_Symbol_Here**dchas.org


https://urldefense.proofpoint.com/v2/url?u=http-3A__www.laboratoryequipment.com_news_2016_03_sniffing-2Dout-2Ddangerous-2Dvapor&d=CwIFaQ&c=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu2s&r=meWM1Buqv4IQ27AlK1OJRjcQl09S1Zta6YXKalY_Io0&m=IN0PjdjPzPhRKEB_36_09dHGwaz7d1lI0KvYzzE8p98&s=wbPQo-0ntvNHH8K1EVbkofaxqYlHBUnKPK6AKYORQQ4&e=

Alkane fuel is a key ingredient in combustible material such as gasoline, airplane fuel, oil " even a homemade bomb. Yet it"s difficult to detect and there are no portable scanners available that can sniff out the odorless and colorless vapor.

But University of Utah engineers have developed a new type of fiber material for a handheld scanner that can detect small traces of alkane fuel vapor, a valuable advancement that could be an early-warning signal for leaks in an oil pipeline, an airliner, or for locating a terrorist"s explosive.

Their discovery was published online March 25, in the American Chemical Society"s journal, ACS Sensors. The team is led by University of Utah materials science and engineering professor Ling Zang, who also is a faculty member with the Utah Science, Technology and Research (USTAR) economic development initiative.

Currently, there are no small, portable chemical sensors to detect alkane fuel vapor because it is not chemically reactive. The conventional way to detect it is with a large oven-sized instrument in a lab.

"It"s not mobile and very heavy," Zang says of the larger instrument. "There"s no way it can be used in the field. Imagine trying to detect the leak from a gas valve or on the pipelines. You ought to have something portable."

So Zang"s team developed a type of fiber composite that involves two nanofibers transferring electrons from one to the other.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.