From: "Weeks Jr., Robert" <rweeks**At_Symbol_Here**LANL.GOV>
Subject: Re: [DCHAS-L] Disposal Beryllium Tubes
Date: Wed, 18 Nov 2015 14:40:26 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: b5eee0ebf0754042a1172251d8925c4c**At_Symbol_Here**EXG13-P-MBX07.win.lanl.gov
In-Reply-To <673A00C44C25834BA3198AADFC1EB7AE297AC680**At_Symbol_Here**PIT-MAIL01.uswa-us.local>


Mr. Wright;

 

This is super and is the way things should be. Congratulations  to both the Steelworkers, Materion, and to OSHA.

 

Robert (Bob) Weeks, Ph.D.,  CIH

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu]On Behalf Of Wright, Mike
Sent: Wednesday, November 18, 2015 7:16 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Disposal Beryllium Tubes

 

Beryllium is transparent to most wavelengths of x-rays, so it is present in x-ray equipment in the form of x-ray windows. The best source for practical information on beryllium is Materion Brush, the only US producer of the pure metal, and the predominant supplier of beryllium alloys. They can go way beyond the regulatory information and give you good advice on the safety issues. In fact, the company has partnered with our union to advocate for a new, and much more protective OSHA standard. (And when's the last time you saw a company push for more stringent regulation of its major product?) The person to contact is Terry Civic:

 

Terence M. Civic
Director:  Health, Safety and Regulatory Affairs
T -  216.383.3698
M - 216.870.9791
Terence.Civic**At_Symbol_Here**Materion.com

 

 

 

Michael J. Wright

Director of Health, Safety and Environment

United Steelworkers

 

412-562-2580 office

412-370-0105 cell

 

See us on the web atwww.usw.org

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu]On Behalf Of Wayne Wood
Sent: Tuesday, November 17, 2015 11:46 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Disposal Beryllium Tubes

 

Before disposing of old x-ray machines be sure to verify the capacitors and transformers are free of PCB's.

 

W.

 

Wayne Wood | Director, Environmental Health and Safety -Directeur, Sant, securit et environnement|McGill University | 3610 rue McTavish Street, 4th floor | Montreal, Quebec, Canada, H3A 1Y2 | Tel: (514) 398-2391

 

 

 

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu]On Behalf Of ranajit.k.talukdar**At_Symbol_Here**GMAIL.COM
Sent: Tuesday, November 17, 2015 10:56 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Disposal Beryllium Tubes

 

Hello All

If beryllium is in the powder form it is classified as hazardous waste and it should be disposed as hazardous waste. Since it is in a tube it should be disposed as hazardous waste as one disposes hazardous chemicals etc. 

all the best

Ranajit Talukdar 

NOAA Earth System Research Laboratory

Chemical Sciences Division

Boulder CO 80305

Sent from my iPhone


On Nov 16, 2015, at 12:55 PM, Sandhya Muralidharan <sandhya.muralidharan**At_Symbol_Here**STONYBROOK.EDU> wrote:

Dear All, 

 

We are looking to dispose some old X-ray equipment at our institution.Are you aware of regulations governing beryllium disposal? 

 

Regards,

 

Sandhya

 

--

Sandhya Muralidharan, PhD

Department of Chemistry

Stony Brook University 

New York

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.