From: "Rogers, Janet" <ROGERS**At_Symbol_Here**EDINBORO.EDU>
Subject: [DCHAS-L] plumbing H2 from remote location
Date: Thu, 1 Oct 2015 15:24:51 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 2E68EA190EA75E4C9399D75B40B6346679A3A73B**At_Symbol_Here**EX01.eup.edinboro.edu


To All:

 

We need to use H2 gas for FID-GC.  Our campus EH&S officer wants us to plumb H2 gas from a cylinder placed at some remote location (as yet unknown to me, but I've heard both: a) from the hallway and b) from outside the building) to our instrument lab.  We do not see why we cannot use the H2 cylinder in the instrument lab, next to the instrument, as we have been doing.  Increasing the distance between the H2 cylinder and the instrument seems like it would increase the safety risk. 

 

I'd appreciate hearing your thoughts/comments/experience in handling H2 safely in your labs.

 

 

Janet Rogers, Ph.D.

Professor

Chemistry Department

Edinboro University of Pennsylvania

230 Scotland Road

Edinboro, PA  16444

 

phone: 814.732.1539

e-mail: rogers**At_Symbol_Here**edinboro.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.