From: "Bell,Martin" <mwb32**At_Symbol_Here**drexel.edu>
Subject: Re: [DCHAS-L] pressure release cap
Date: Mon, 11 Aug 2014 18:01:56 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: D00E7D17.43657%mwb32**At_Symbol_Here**drexel.edu


I use a company call PSI for vented caps. The link to the website is http://www.psix.com. We use these caps for venting strong etchants. 

Martin 


Martin W. Bell, M.S. CIH CSP 

Director, Environmental Compliance

Department of Environmental Health and Safety

 

Drexel University

400 North 31st Street

Philadelphia, PA 19104

Tel: 215.895.5892 | Fax: 215.895.5926

Mobile: 215-778-4278

drexel.edu/facilities/healthsafety

 

From: Wayne Phan <Wayne.Phan**At_Symbol_Here**POMONA.EDU>
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Date: Monday, August 11, 2014 at 1:27 PM
To: "DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU" <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Subject: [DCHAS-L] pressure release cap

Hi,

Does anyone know where I can purchase pressure release  cap for chemical bottle?  Is there such a cap?

 

Thanks,

 

Wayne

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.