From: "Skarda, Jay" <SkardaJ**At_Symbol_Here**NJHEALTH.ORG>
Subject: Re: [DCHAS-L] NFPA and OSHA, Harmony?
Date: June 6, 2013 2:56:48 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <5DD59467C6151A4484615BA05BC2836E03FB8198**At_Symbol_Here**Radish.byu.local>


I think one thing that this opinion does not take in to consideration is the HMIS III system, which is pretty much the same as NFPA 704, i.e.., completely opposite of the new GHS.  And that information is designed for the user, not firefighters.  So there are plenty of opportunities for confusion.  Not sure how that is going to be resolved. 

Jay Skarda
Director of Safety & Security
National Jewish Health

 


From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Steve McLean
Sent: Thursday, June 06, 2013 12:19 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] NFPA and OSHA, Harmony=3F

Keep in mind that the NFPA diamond is designed for FIREFIGHTERS, NOT chemists and laboratory personnel.  In most cases, a firefighter does not care about the exact value of the LD50.  Water is toxic in a sufficiently high dose, but in a fire situation a firefighter is going to consider it a “0” – no health hazard – regardless o=66 the amount that is present.

 

As a chemist who spent 12 years on a professional industrial firefighter crew, I can tell you that most firefighters care about the following: Is it highly =66lammable or not=3F  Is it water-reactive or not=3F Is it a serious health hazard or not=3F  Is it reactive or not=3F  If the answer is “not”, then a ZERO makes perfect sense.

 

Monona is correct: “We have a real chance here to finally teach people something real and useful in hazcom.  Let's not confuse the issue with the NFPA diamond. My translation: “We need to teach people about the hazards, but we need to make sure people know the difference between GHS and NFPA so they don’t confuse them.” 

 

We should allow GHS to teach us about Hazcom, but we should also allow the (unaltered) NFPA diamond to provide the BASIC information that is needed by =66irefighters.  If you cannot tell the difference between a NFPA diamond  and  a GHS pictogram with its associated class and category, regardless of their different scaling system,  then you should not be working with hazardous materials.

 

*******************

Steven J. McLean, CHMM

Laboratory Safety Manager

Risk Management - 241 FB

Office: (801) 422-6879

stevemclean**At_Symbol_Here**byu.edu

 

 

 

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Monona Rossol
Sent: Thursday, June 06, 2013 11:05 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] NFPA and OSHA, Harmony=3F

 

I'm hoping the NFPA diamond would be either dropped or seriously revised.  The very idea that "toxicity" can be represented by a single number from 0 to 4 is misleading.  First, there is no "zero" toxicity as NFPA seems to indicate.  So the GHS idea of going from high numbers for low toxicity to 1 =66or highly toxic is better from the get-go. 

 

And the GHS understands that extreme acute toxicity, lower levels of acute toxicity, and chronic toxicity need to be handled separately--especially because many carcinogens and reproductively hazardous substances are acutely non-toxic as demonstrated by LD50s and LD50s, skin/eye damage, respiratory and other acute expressions of toxicity. 

 

We have a real chance here to finally teach people something real and useful in hazcom.  Let's not confuse the issue with the NFPA diamond.

Monona Rossol, M.S., M.F.A., Industrial Hygienist

President:  Arts, Crafts & Theater Safety, Inc.

Safety Officer: Local USA829, IATSE

181 Thompson St., #23

New York, NY 10012     212-777-0062

actsnyc**At_Symbol_Here**cs.com   www.artscraftstheatersafety..org


 

-----Original Message-----
From: Secretary, ACS Division of Chemical Health and Safety <secretary**At_Symbol_Here**DCHAS.ORG>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sent: Wed, Jun 5, 2013 10:15 am
Subject: [DCHAS-L] NFPA and OSHA, Harmony=3F

Mark Ellison <mellison**At_Symbol_Here**sachsco.com>
Subkect: NFPA and OSHA, Harmony=3F
 
Thought I would share this with the group.  Interesting…
 
http://www.nfpa.org/publicJournalDetail.asp=3FcategoryID=2915&itemID=62587&order_src=C246&cookie%5Ftest=1
 
Mark Ellison
Assistant Vice President-Safety Director
Sachs Electric Company
St. Louis, Missouri
 
The key quotes from the article inlcude:
One result of this collaboration is that OSHA does not see any reason for NFPA 
704 to be revised in order to correspond with the GHS category numbering...
...
For now, NFPA and OSHA are working to ensure that the two systems can 
effectively work together without significant change.. Going forward, experience 
from full implementation of the GHS system may demonstrate a need for slight 
changes to NFPA’s system, but without the expectation that it would ever be 
eliminated.

NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.