From: "Jeskie, Kimberly B." <jeskiekb**At_Symbol_Here**ORNL.GOV>
Subject: Re: [DCHAS-L] perchloric acid fume hoods
Date: March 2, 2013 9:58:19 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <A4BDFFCAC336824B8501F8FA6E1DA2D4D2BE07AA23**At_Symbol_Here**EXCHMBA.ornl.gov>


The program that Rick and others followed was from ORNL. I can put you in contact with the program lead if you would like to talk to him about the approach



Sent with Good (www.good.com)


From: Harry Elston [helston**At_Symbol_Here**FGI.NET]
Sent: Saturday, March 02, 2013 09:28 AM Eastern Standard Time
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] perchloric acid fume hoods

Mary Beth (and list):

Rick Kelly at LLNL wrote a very good piece on perchlorate hoods.  It is found here:

Kelly, Richard.  Disassembling a perchlorate-contaminated ventilation system.  Chem. Health Saf. 2000, 7(3), 5.

The DOI is here:  http://dx.doi.org/10.1016/S1074-9098(00)00079-4

If you search on ScienceDirect, you will need to search Chemical Health and Safety, since the article was pre-"Journal of" days.

Best,

Harry
+++++++++++++
Harry Elston, Ph.D., CIH
Editor, Journal of Chemical Health & Safety


On Sat, Mar 2, 2013 at 7:08 AM, Reinhardt, Peter <peter.reinhardt**At_Symbol_Here**yale.edu> wrote:
I recall an excellent presentation, years ago, from folks at from a large government lab who discovered this problem for many of their labs and came up with a good approach. This was part of a DivCHAS program at an ACS national meeting. Perhaps someone can remember the specifics, or if it was written up in JCHAS. -- Pete Reinhardt, Yale EHS

On Mar 1, 2013, at 9:18 PM, "Lanza, Mary Beth" <MaryBeth.Lanza**At_Symbol_Here**WEYERHAEUSER.COM> wrote:

Does anyone have experience with the removal of perchloric acid hoods from a lab?  Any information on the subject and references to resources capable of performing this task would be greatly appreciated.  I do realize there is a special procedure and tremendous cost associated with this, but I wanted to get a better idea of specifically what is involved.

Thank you.

Mary Beth Lanza
Scientist - Infrared Spectroscopy
Weyerhaeuser Analytical Chemistry
WTC Chemical Hygiene Officer
mary-beth.lanza**At_Symbol_Here**weyerhaeuser.com
(253) 924-6013 (desk)
(253) 924-6290 (lab)
(253) 924-6654 (fax)

Need to request testing services?  Want to know more about Analytical Chemistry & Microstructure?  Visit us at:  http://wss.weyer.com/sites/acm/default.aspx

 

 

 

 


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.