About This Archive  | DCHAS-L 2012 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: [DCHAS-L] Improving graduate education in chemistry
Date: December 14, 2012 7:57:50 AM EST
Author: "Secretary, ACS Division of Chemical Health and Safety" 		Next by Date:
Subject: Re: [DCHAS-L] Gas cylinders storage in hallways
Date: December 14, 2012 9:29:42 AM EST
Author: Daniel Crowl

From: "paracelcusbombastusvon**At_Symbol_Here**juno.com" <paracelcusbombastusvon**At_Symbol_Here**JUNO.COM>
Subject: Re: [DCHAS-L] labels
Date: December 14, 2012 9:13:53 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <20121214.081353.12175.1**At_Symbol_Here**webmail01.vgs.untd.com>

If you are having problems with dribbles wiping out labels you have a bigger problem - exposure. Look into alternate methods of storing and dispensing.
Lynn Knudtson


---------- Original Message ----------
From: "Wagoner, Jo"
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] labels
Date: Thu, 13 Dec 2012 18:27:16 +0000

We use Word and print on Avery 5163 (2"x4") or 5160 (1"x2 5/8"). We
sometimes use the WeatherProof Avery 5523 (2"x4") labels which stay on well
yet can be removed easily. The downside on the WeatherProof label over the
regular label is that dribbled organic solvents may wash off the printing.
Occationally we have used the same sizes of a different brand.

Alternatively, we use the Fisherbrand Self-Adhesive Labels that are white
with red borders (11-850A through 11-850F) and hand print the required
information with a Sharpie. These are durable, stay on well, and can be
taken off easily (before getting them wet).

-Jo

On 12/13/12 12:17 PM, "Brian T. Mars" wrote:

How does everyone make temporary labels for solutions that go to lab? A
generation ago I programmed an Apple IIe to make labels with a dot matrix
printer. They worked great but eventually the computer people stopped
supporting that hardware. Now I use a PC with a Dymo Labelwriter Turbo.
These labels are on thermal print stock and don't do well when solvents or
acids dribble on them. I'm hoping some of you have a better method.

-Brian
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.juno.com/TGL3131/50cb3442caf5834421e9cst03vuc

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.