From: Larry Maglin - NZ <lmaglin**At_Symbol_Here**NETZERO.NET>
Subject: Re: [DCHAS-L] labels
Date: December 13, 2012 12:52:42 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <477416075.89744897.1355419041692.JavaMail.root**At_Symbol_Here**carleton.edu>

I used to use desk top publishing software (any will do)
.... Make up some sign templates NFPA, OSAH style, what ever you use and fill
in the blanks
Sometimes I laminated the signs... I could get customized size and message
and get a lot of wear out of them....

-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of
Brian T. Mars
Sent: Thursday, December 13, 2012 12:17 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] labels

How does everyone make temporary labels for solutions that go to lab? A
generation ago I programmed an Apple IIe to make labels with a dot matrix
printer. They worked great but eventually the computer people stopped
supporting that hardware. Now I use a PC with a Dymo Labelwriter Turbo.
These labels are on thermal print stock and don't do well when solvents or
acids dribble on them. I'm hoping some of you have a better method.

-Brian

____________________________________________________________
Woman is 57 But Looks 27
Mom publishes simple facelift trick that angered doctors...
http://thirdpartyoffers.netzero.net/TGL3241/50ca15e997f7f15e959b2st03duc

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.