From: Doug Walters <waltersdb**At_Symbol_Here**EARTHLINK.NET>
Subject: Re: [DCHAS-L] Silica gel dispensing (Was: Toxic dust handling)
Date: June 27, 2012 8:05:48 AM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <006101cd53ec$3597f1f0$a0c7d5d0$**At_Symbol_Here**net>


The web site for Flow Sciences: 


http://www.flowsciences.com

They have  several well-designed and tested products for bulk powder (drum) operations and also what the Pharmaceutical Industry calls potent powders (hazardous dusts).

Doug Walters
KCP,Inc.
 
On Jun 26, 2012, at 6:37 PM, Bruce Van Scoy wrote:

You may want to check a Flow Sciences Bulk Powder Handling Ventilated Safety Enclosure.  Essentially the drum is lifted up through a rubber flange built into the base of the cabinet, so the top just breaks the enclosures base/bottom surface.  All particulates generated during dispensing are exhausted through two HEPA filters prior to the final exhausted air removal by a house exhaust system.
BruceV 
 
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of ILPI
Sent: Tuesday, June 26, 2012 4:11 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Silica gel dispensing (Was: Toxic dust handling)
 
By an interesting coincidence, I received this query from a colleague today.  A very similar question to the earlier one on dusts.  Anyone have handling advice?   Thanks,  Rob Toreki
 
The group buys silica gel in big drums.  These are stored in our storage room.  They are too tall to use in our fume hoods.  When the students need to fill up their individual jars (2 L or so) they come in,  put on a dust mask and fill their jars.  As you might expect,  a thin coating of silica dust ends up everywhere and builds up over time.  We've just had the storage room renovated,  and I'd like to avoid it reverting to a silica pit,  especially since we may be putting a drybox in there. Are you aware of any commercial dispensers or containment units which would allow us to dispense silica into jars while keeping the inevitable dust cloud contained? 
 
  ======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012
 



-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ralph B Stuart
Sent: Tuesday, June 26, 2012 9:42 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Toxic dust handling

A question has arisen here about the best practices for handling dusts known to be unusually toxic, such as teratogens or mutagens. It appears from google searches that many academic Standard Operating Procedures recommend using these dusts in a fume hood. This seems counter-intuitive to me, as strong air flows around these dusts would seem to create a housekeeping challenge by dispersing the dust around the use area. This could lead to unnecessary contamination of someone's hands as they work with the material. In addition, the ergonomics of performing delicate operations, such as handling dusts, in a hood can be a challenge due to their one size fits all nature.

Prudent Practices indicates that highly toxic dusts should be used in a hood, but that seems to be rolled up in the same recommendation as for handling gases and vapors. It seems to me that dusts present distinct hygiene challenges from gases and vapors. I wonder if anyone has addressed this issue with specific rules that distinguish between these kinds of chemicals?

Thanks for any information about this.

- Ralph

Ralph Stuart CIH
Laboratory Ventilation Specialist
Department of Environmental Health and Safety Cornell University

rstuart**At_Symbol_Here**cornell.edu

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.
--Apple-Mail=_E35FD448-A284-41D2-A605-7B1810A1C599--