From: Michael Ng <Michael.Ng**At_Symbol_Here**LIU.EDU>
Subject: Re: [DCHAS-L] HF Acid Eater
Date: February 10, 2012 10:26:52 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <BAY166-W4714A2F3379883B86CBAC4C47B0**At_Symbol_Here**phx.gbl>

Brandon,

I was reading the MSDS for Clift Industries HF Acid Eater and I was unable to determine the contents of the spill absorbent material (Inorganic Salt Solutions is too vague as an ingredient list).

I would recommend that you ask the manufacturer if HF Acid Eater can neutralize regular mineral aids (I doubt it). Their contact information is as follows:


Clift Industries, Inc.

PO Box 67153

Charlotte, North Carolina 28226

800-996-9901

704-752-0031

Fax: 704-544-2532

Lastly, the MSDS indicates that the product itself is not a RCRA hazardous material.

Hope that helps.

Michael Ng
Environmental Health and Saftey Manager
Long Island University Brooklyn Campus
Buildings and Grounds
1 University Plaza Room M101
Brooklyn, NY 11201
Tel: (718)-488-1608
Fax: (718)-488-3337
michael.ng**At_Symbol_Here**liu.edu
________________________________
From: DCHAS-L Discussion List [dchas-l**At_Symbol_Here**med.cornell.edu] on behalf of Alan Hall [ahalltoxic**At_Symbol_Here**MSN.COM]
Sent: Thursday, February 09, 2012 12:21 PM
To: DCHAS-L**At_Symbol_Here**med.cornell.edu
Subject: Re: [DCHAS-L] HF Acid Eater

Brandon,

It will depend entirely on what is in the "HF Acid Eater Kits". If something will neutralize the H+ part of an acid, then it might just possibly work for all acids. If it only "neutralizes" the F- component, then it might only work for HF and acid fluoride compounds (such as BF3). I'll leave the calculations to the physical chemists in the group as to how much would be needed to "neutralize" how much. I would suspect some sort of calcium or magnesium component, which would be useless for acids other than HF except as an absorbant. The corrosive risk would still be there.

I'd suggest ordering and stocking something more appropriate and diposal of these "Kits" as appropriate.

Alan
Alan H. Hall, M.D.
Medical Toxicologist

Date: Thu, 9 Feb 2012 00:46:53 +0000
From: brandon.chance**At_Symbol_Here**QATAR.TAMU.EDU
Subject: [DCHAS-L] HF Acid Eater
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU

CHAS,

I recently discovered that my department has a number of HF Acid Eater spill kits in stock, yet no lab within the university currently uses HF. I also discovered that we are completely out of standard acid spill kits. My question is, can an HF spill kit be used on other acids? The kit MSDS does not list ingredients so I am a bit in the dark regarding its active component.

Thanks,

Brandon Chance, M.S.

Safety and Environmental Compliance Manager
Office of Building Operations & HSSE
Texas A&M University at Qatar
brandon.chance**At_Symbol_Here**qatar.tamu.edu

PO Box 23874 | Doha, Qatar
TAMUQ Building Room 225E | Education City

(o) +974.4423.0495 | (m) +974.6668.3552 | SkypeIn USA 001.281.764.1776

www.qatar.tamu.edu

It's Time For Texas A&M

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.