About This Archive  | DCHAS-L 2011 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: House Air Pressure
Date: Fri, 8 Jul 2011 12:29:46 -0700
Author: "Demer, Frank R - (demer)" 		Next by Date:
Subject: Endocrine-Disrupting Chemicals Exposure Elimination Act of 2011
Date: Fri, 8 Jul 2011 22:59:59 -0400
Author: ILPI


Date: Fri, 8 Jul 2011 16:37:07 -0400
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Sujit Sengupta <admiradhes**At_Symbol_Here**GMAIL.COM>
Subject: Re: House Air Pressure
In-Reply-To: <8C28F3F9C0708141A611C73B4D80E70E0D70FD2B9E**At_Symbol_Here**VA3DIAXVS461.RED001.local>




It should certainly less than 15psig the limit to be exempt from a pressure
vessel
Please write to me if you need any further clarifications
Best Regards,
Sujit Sengupta
PRESIDENT
ADMIRA DISTRIBUTED HYBRID ENERGY SYSTEMS INC.

On Fri, Jul 8, 2011 at 3:29 PM, Demer, Frank R - (demer) <
demer**At_Symbol_Here**email.arizona.edu> wrote:

> Does anyone in the group know if there is a specific pressure limit for
> laboratory house air pressure?  30 psi?  ****
>
> ** **
>
> Frank R. Demer, MS, CIH, CSP****
>
> Health Safety Officer****
>
> Industrial Hygiene and Safety****
>
> University of Arizona****
>
> Department of Risk Management Services****
>
> ** **
>
> Phone:  520.621.3585****
>
> Fax:  520.621.3706****
>
> Email:  demer**At_Symbol_Here**email.arizona.edu****
>
> Mailing Address:  P.O. Box 210300, Tucson, AZ  85721-0300****
>
> Street Address:  220 W. 6th St., Tucson, AZ 85701 (2nd floor, East Bldg.)*
> ***
>
> Web Address:  risk.arizona.edu ****
>
> ** **
>
> ** **
>





It should certainly less than 15psig the limit to be exempt from a pressure
 vessel
Please write to me if you need any further clarifications
Bes
t Regards,
Sujit Sengupta
PRESIDENT
ADMIRA DISTRIBUTED HYBRID ENER
GY SYSTEMS INC.


On Fri, Jul 8, 2011 at 3:29 PM, Demer, Frank
 R - (demer) <demer**At_Symbol_Here**email.arizona.edu> wrote:


Does anyone in the group know if there is a specific pressure limit for
 laboratory house air pressure?=A0 30 psi?=A0 

=A0
Frank R. Demer, MS, CIH, CSP

Health Safety Officer
Industrial Hygiene and Safety

University of Arizona
Department of
 Risk Management Services

=A0
Phone:=A0 520.621.3585


Fax:=A0 520.621.3706
Email:=A0 demer**At_Symbol_Here**email.arizona.edu



Mailing Address:=A0 P.O. Box 210300, Tucson, AZ=A0 8
5721-0300
Street Address:=A0 220 W.
 6th St., Tucson, AZ 85701 (2nd floor, East Bldg.)

Web Address:=A0 risk.
arizona.edu 
=A0<
/p>
=A0



--20cf301e2f27104d3d04a794cc58--

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.