Date: Mon, 19 Apr 2010 07:37:29 -0600
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Robert Weeks <rweeks**At_Symbol_Here**LANL.GOV>
Subject: Re: Mezzanine Safety Gates
In-Reply-To: mmm.com>
Certainly would not recommend the gates for heights over 4'.

At 06:52 AM 4/16/2010, you wrote:

We are considering using mezzanine safety gates in lieu of fall restraint when loading/unloading materials. Would anyone NOT recommend installing them for this purpose?

Examples can be found at this link:
http://www.mezzaninesafetygates.com/models.htm

Thanks for your comments!

Annette M. Moris, CSP
3M Company
3M Center, Bldg 518-1-01
St. Paul, MN 55144-1000
Phone: 651-733-7361

This communication may contain confidential information and is intended only for the addressee(s) listed above.

Robert Weeks, PhD, CET
ESH-IO
MS J596
Los Alamos National Laboratory
Phone   (505) 665-5633
FAX        (505) 665-4859

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.