Check out Safety Emporium for your N95, N99, and face shield needs.
Date: Wed, 18 Nov 2009 09:27:08 -0600
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Janet Baum <baum.janet**At_Symbol_Here**GMAIL.COM>
Subject: Re: Centrally located glass-walled fume hoods
In-Reply-To: <A997AA317050344CA69EA201A733C063190F65**At_Symbol_Here**mail7.amherst.edu>
Washington University in St. Louis has all u.g. student labs with the
Fisher-Hamilton (now Thermo-Electron) glass-walled FH. in their Laboratory
Science Building. These are all arranged back to back. Mr. Ed Hiss is the
facility manager for that building and can offer you some information. He
can be contacted through WUSTL's Chemistry Dept.
Janet Baum, AIA
Graduate School of Architecture and Urban Design
Washington University in St. Louis
On Wed, Nov 18, 2009 at 8:32 AM, Kristi Ohr wrote:
> Does anyone have the glass-walled fume hoods (such as the TruView
> hoods made by Kewaunee) in their teaching labs? I'm specifically interested
> in the back-to-back configuration of these in the center of the room (as
> opposed to the around the perimeter of the room layout). We're in the
> process of planning a new chemistry building, and are considering the kind
> that have an actual glass barrier between the hoods so that the hoods are
> not dependent on one another. Does anyone have these in their labs, and if
> so, what sorts of problems have you had with them?
>
> Thank you,
>
> Kristi Evenson-Ohr
> Amherst College
>
Washington University in St. Louis has all u.g. student labs with the Fishe
r-Hamilton (now Thermo-Electron) glass-walled FH. in their Laboratory Scien
ce Building. =A0These are all arranged back to back. =A0Mr. Ed Hiss is the
facility manager for that building and can offer you some information. =A0H
e can be contacted through WUSTL's Chemistry Dept.
Janet Baum, AIA
Graduate School of Architecture an
d Urban Design
Washington University in St. Louis
On Wed, Nov 18, 2009 at 8:32 AM, Kristi Ohr
<kohr**At_Symbol_Here**amherst.edu> wrote:
Does anyone have the
glass-walled fume hoods (such as the TruView hoods=A0made by Kewaunee)=A0i
n their teaching labs?=A0 I'm specifically interested in the back-to-ba
ck configuration of these in the center of the room (as opposed to the arou
nd the perimeter of the room layout).=A0 We're in the process of planni
ng a new chemistry=A0building, and are=A0considering the kind that have an
actual glass barrier between the hoods so that the hoods are not dependent
on one another.=A0 Does anyone have these in their labs, and if so, what so
rts of problems have you had with them?
=A0
Thank you,
=A0
Kristi Evenson-Ohr
Amherst College
Previous post | Top of Page | Next post