Date: Thu, 16 Jul 2009 11:31:17 -0400
Reply-To: kauletta**At_Symbol_Here**NOTES.CC.SUNYSB.EDU
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Kim Auletta <kauletta**At_Symbol_Here**NOTES.CC.SUNYSB.EDU>
Subject: Re: Cite Reference
In-Reply-To: <002001ca0628$6cde0ab0$469a2010$**At_Symbol_Here**com>


We also use the ANSI/AIHA Z9.5-2003 Laboratory Ventilation standard & NFPA 
45 for fume hood requirements.

Kim Auletta
Lab Safety Specialist
EH&S    Z=6200
Stony Brook University
kauletta**At_Symbol_Here**notes.cc.sunysb.edu
631-632-3032
EH&S Web site: http://www.stonybrook.edu/ehs/lab/

Remember to wash your hands!


From:
Russ Phifer 
To:
DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Date:
07/16/2009 11:27 AM
Subject:
Re: [DCHAS-L] Cite Reference
Sent by:
DCHAS-L Discussion List 


There is no specific OSHA requirement for fume hood monitors.  The 
applicable reference is the OSHA Laboratory Standard, which requires the 
chemical hygiene plan to include:
 
1910.1450(e)(3)(iii)
A requirement that fume hoods and other protective equipment are 
functioning properly and specific measures that shall be taken to ensure 
proper and adequate performance of such equipment.
 
While newer laboratory hoods generally include a built-in flow monitoring 
device, older hoods are commonly tested periodically using a portable flow 
monitoring device such as a vaneometer.   Testing frequency should be 
addressed in your chemical hygiene plan; many facilities perform such 
testing quarterly or at least semi-annually.  Additional local codes or 
insurance requirements may make more frequent testing necessary.
 
Russ Phifer
 
 
Russ Phifer
WC Environmental, LLC
1085C Andrew Drive
West Chester, PA  19380
610-696-9220x12/ fax 610-344-7519
rphifer**At_Symbol_Here**wcenvironmental.com
 
P Please consider your environmental responsibility before printing this 
e-mail or any other document
 
From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**LIST.UVM.EDU] On Behalf Of 
Hilbrandt, Robert
Sent: Thursday, July 16, 2009 11:04 AM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] Cite Reference
 
Could you site the requirement for fume hood monitors.  We are located in 
New York State (upstate) and are not aware of such a requirement.
Robert W. Hilbrandt Jr., RMS 
Radiochemistry Technical Director / QA Manager 
Westchester County Dept. Laboratories & Research 
10 Dana Road, Valhalla, NY  10595 
Tel: 914-231-1531  Fax: 914-231-4458 
rwh2**At_Symbol_Here**westchestergov.com 
Visit us at 
http://blog.westchestergov.com/index.php?option=com_content&task=view&id=492&Itemid=1009 

Checked by AVG - www.avg.com
Version: 8.5.387 / Virus Database: 270.13.16/2241 - Release Date: 07/16/09 
05:58:00


We also use the ANSI/AIHA Z9.5-2003 Laboratory Ventilation standard & NFPA 45 for fume hood requirements.

Kim Auletta
Lab Safety Specialist
EH&S    Z=6200
Stony Brook University
kauletta**At_Symbol_Here**notes.cc.sunysb.edu
631-632-3032
EH&S Web site:
http://www.stonybrook.edu/ehs/lab/

Remember to wash your hands!


From: Russ Phifer <rphifer**At_Symbol_Here**WCENVIRONMENTAL.COM>
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Date: 07/16/2009 11:27 AM
Subject: Re: [DCHAS-L] Cite Reference
Sent by: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>



There is no specific OSHA requirement for fume hood monitors.  The applicable reference is the OSHA Laboratory Standard, which requires the chemical hygiene plan to include:
 
1910.1450(e)(3)(iii)
A requirement that fume hoods and other protective equipment are functioning properly and specific measures that shall be taken to ensure proper and adequate performance of such equipment.
 
While newer laboratory hoods generally include a built-in flow monitoring device, older hoods are commonly tested periodically using a portable flow monitoring device such as a vaneometer.   Testing frequency should be addressed in your chemical hygiene plan; many facilities perform such testing quarterly or at least semi-annually.  Additional local codes or insurance requirements may make more frequent testing necessary.
 
Russ Phifer
 
 
Russ Phifer
WC Environmental, LLC
1085C Andrew Drive
West Chester, PA  19380
610-696-9220x12/ fax 610-344-7519
rphifer**At_Symbol_Here**wcenvironmental.com
 
P Please consider your environmental responsibility before printing this e-mail or any other document
 
From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**LIST.UVM.EDU] On Behalf Of Hilbrandt, Robert
Sent:
Thursday, July 16, 2009 11:04 AM
To:
DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject:
[DCHAS-L] Cite Reference

 

Could you site the requirement for fume hood monitors.  We are located in New York State (upstate) and are not aware of such a requirement.

Robert W. Hilbrandt Jr., RMS
Radiochemistry Technical Director / QA Manager

Westchester County Dept. Laboratories & Research

10 Dana Road, Valhalla, NY  10595

Tel: 914-231-1531  Fax: 914-231-4458

rwh2**At_Symbol_Here**westchestergov.com

Visit us at
http://blog.westchestergov.com/index.php?option=com_content&task=view&id=492&Itemid=1009

Checked by AVG - www.avg.com
Version: 8.5.387 / Virus Database: 270.13.16/2241 - Release Date: 07/16/09 05:58:00

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.