About This Archive  | DCHAS-L 2003 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Position Opening - Chemical Hygiene Officer
Date: Wed, 8 Oct 2003 09:41:06 -0400
Author: Peter Reinhardt 		Next by Date:
Subject: ASHRAE 110 testing firms
Date: Thu, 9 Oct 2003 12:51:21 -0400
Author: Joe


Date: Wed, 8 Oct 2003 09:00:19 -0500
Reply-To: Rebecca Schafer <rebecca_schafer**At_Symbol_Here**CERILLIANT.COM>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Rebecca Schafer <rebecca_schafer**At_Symbol_Here**CERILLIANT.COM>
Organization: Cerilliant
Subject: Silver nitrate mixed with silica
An article by Dick Sullivan gives caution regarding mixture of silver
nitrate with finely particulated metals like aluminum or zinc.  I have read
MSDS and other safety information regarding this compound but have found
nothing regarding mixture with silica.  I am trying to make a 14% silver
nitrate silica.  The plan was to dissolve the silver nitrate in water add
the silica and mix well.  Then heat it in a microwave for 10 minutes to
speed drying.  Does anyone have any information to support this procedure?

Thanks
Rebecca Schafer

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.